If you’ve ever had to do your laundry, turned on the machine, and noticed that your washing machine isn’t running, you may have wondered, “Why is there no water going into my washing machine?”. Encountering issues with your washing machine can be frustrating, leaving you worried about when you can wash your clothes next and when you can afford repairs.
Being able to diagnose the problem will not only ease your stress but will give you insight into how to solve the issue. Be on the lookout for the following signs of washing machine malfunctions:
● The washing machine isn’t filling with water when turned on
● The washing machine makes banging noises when turned on and doesn’t fill
● The washing machine stops in the middle of a cycle with no water inside
If you’ve noticed these problems with your washing machine, this blog will guide you through the potential causes and their solutions.
Common Reasons Why Water Isn’t Going Into Your Washing Machine
From bent drain hoses to your water supply, many washing machine users will encounter an issue with their appliance at one point in their life. There are many reasons why you might notice some problems with your appliance, including age, general wear and tear, and machine misuse.
While some problems are minor and can be solved with DIY fixes, many may require help from a professional. Don’t worry; most companies offer free estimates on repairs. However, to help you make informed decisions about which professional services to retain, we’re sharing some of the most common possible reasons your washing machine won’t fill with water.
Low Water Pressure
One of the most common reasons behind washing machines having no water is low water pressure. Water cannot run consistently in your watching machine if the pressure is unstable. One sign to look out for is an unusual sound when your washing machine would normally be filling up with water.
There are various reasons you may be experiencing low water pressure, including clogged pipes and high water demand. If you first notice inconsistent water flow with your washing machine, it’s a good idea to inspect the water flow of your home appliances.
First, get access to the water supply faucet, turn off the water supply, and remove the inlet hose. Be sure to have a bucket on hand and then turn the tap to check the water flow.
When your water pressure is unstable, your washing machine isn’t the problem. If you notice inconsistent water flow or changes, such as varying water pressure, the issue lies in your water pressure systems, not the appliance.
Professional plumbers will be able to examine and repair your water pressure so your washing machine will be up and running properly in no time. Be sure to get in touch with a professional in cases where more than one home appliance isn’t receiving water.
No Water Supply/Restricted Water Supply
If you’ve checked the above and still wonder, “Why is there no water going into my washing machine?” you may have a restricted water supply. When water isn’t filling up your washing machine, you should immediately check your water supply. If your water supply isn’t on, water won’t be able to fill up your washer.
However, a clogged, bent, or damaged inlet hose can restrict water flow even if your water supply is on.
Water flows through inlet hoses into the washing machines. After confirming that the water supply is on, examine the condition and location of the hose. For example, your inlet hose may be squeezed between the wall and your washing machine if the washer is positioned too close to the wall.
Ensure that your hose is straightened by untangling any bends or crimps so water can easily flow into the washing machine. Disconnect the hose from both ends to examine the inside, then clean any dirt or debris that may be clogging it.
After ensuring there are no issues with the inlet hose, you can inspect the filter, or the inner valve screen, when removing the hose. You’ll know the screen is clogged if you hear an unusual noise when you turn on the washing machine. Carefully remove the filter and clean off any debris to allow your washing machine to perform optimally.
If you find issues with your water supply, you can contact a professional plumber to solve this issue.
Water Inlet Valve System Issues
While the hoses are commonly the reason behind the lack of water in a washing machine, a faulty water inlet valve can also prevent water flow. Because water flows from the hoses to the inlet valve, checking the valve for any problems is essential.
The water inlet valve should be at the back of the washing machine underneath the top lid. It should have two ports for machines that use both hot and cold water and one for machines that only use cold water.
These ports should be connected to valves that control the flow of hot and cold water. Using a multimeter, test the solenoids for electrical continuity. Any results with zero or infinite resistance will require a replacement water inlet valve.
If you’re unfamiliar with a multimeter or how to use one, you can always contact an appliance repair professional for a thorough inspection. Experienced technicians will inspect your washing machine, diagnose the problem, and provide a solution.
Faulty Water Level Switches
The water level pressure switch is responsible for filling the washing machine with water and draining the water between cycles. A faulty pressure switch can lead to your machine not filling up with water.
To identify a faulty water level switch, you can usually locate the switch inside your washer under the lid. The location can vary depending on your washing machine, so you can refer to the user’s manual if you cannot find the pressure switch.
To identify any problems with your pressure switch, you will need to inspect the hose and switch itself.
First, ensure that the hose is connected tightly from both ends, straightening out any kinks or bends. You can disconnect the hose to examine and clean any debris that might cause a blockage. Replace your hose if there are any cracks or holes present.
When you confirm your hose is functional and in good condition, you will need to test for an electrical failure in the water-level pressure switch. Testing a pressure switch with a multimeter will let you know if your switch is experiencing any malfunctions. To check for electrical continuity, follow these steps:
● Make sure the multimeter reads 1 OHM (times one position)
● Disconnect the wires from the terminals.
● Make sure you can see three terminals.
● Test the terminals by the pairs: 1 and 2, 1 and 3, 2 and 3.
If you find that pairs 1 and 2 and 1 and 3 don’t have continuity, but 2 and 3 have continuity, your pressure switch is operating normally. Other results indicate a malfunction in the pressure switch, in which you should get a replacement.
Testing electrical currents is a safe but complicated process. Schedule an appointment with appliance repair professionals if you’re uncertain about your results or feel more confident with an expert.
Faulty Selector Switch
The washing machine’s selector switch lets you choose between wash, rinse, and spin options. This switch transfers the signal responsible for sending either hot or cold water through the machine. A malfunctioning selector switch will prevent the washing machine from filling with water.
To investigate the condition of your selector switch, you can read about the wire connections of the switch in the user’s manual of your model. Like other washing machine issues, you can check continuity with a multimeter. This test will determine whether your switch is faulty or worn out.
Clogged Filters
Clogged filters will prevent water from flowing into a washing machine. Unplug your washing machine first, then disconnect the hoses. You should have access to the filters once you disconnect the hoses.
Inspect the filters to check for lint and dust and clean off any present debris. You can easily replace the filters to prevent further issues. If you are still having trouble with you washer, contact our trusted appliance repair Kelowna based repair company now.
Recent Comments